Luster Glass
how do i bring back the luster to my marble counter tops?
soap scum, rust stains, tooth paste, glass rings.
Clean stone surfaces with a few drops of neutral cleaner, stone soap (available at hardware stores or from your stone dealer) or a mild liquid dishwashing detergent and warm water. Use a clean rag mop on floors and a soft cloth for other surfaces for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently. Do not use scouring powders or creams; these products contain abrasives that may scratch the surface.
Bath and Other Wet Areas
In the bath or other wet areas, soap scum can be minimized by using a squeegee after each use. To remove soap scum, use a non-acidic soap scum remover or a solution of ammonia and water (about 1/2 cup ammonia to a gallon of water). Frequent or over-use of an ammonia solution may eventually dull the surface of the stone.
Vanity Top Surfaces
Vanity tops may need to have a penetrating sealer applied. Check with your installer for recommendations. A good quality marble wax or non-yellowing automobile paste wax can be applied to minimize water spotting.
Check out these deals on Luster Glass-related items and save!
 SCARLET GOLD LUSTRE TiLes/Glass/Mosaic/ART/gems 50+ Larger Projects 1/2" Tiles US $5.19 
|
 Pixie Dust 5g Glass Sparkle Luster Highlight Effect US $2.19
|
Devardi Glass Golden Luster Frit, Lampwork Bead Making Tutorial
Recently found via this site: